For the beginner or Intermediate Colloidal Producer

- you are minimally required to be familiar with the following:

1- Basic knowledge of AC mains Electricity, Power Supplies and their DC outputs.

2-Know what voltage and current are and how they affect your colloidal batch outcomes.

3- The ability to use electrical/electronic power supplies safely around live colloidal batches in a wet, potentially dangerous environment.

4- The ability to safely install and manipulate electrical connections, electrodes, and alligator clips or electrode holder apparatus

5-The ability to work with lab beakers and handheld PPM testing meters

 6- The ability to adjust any DIGIPRO™ System or other Bench Power Supply (or Colloidal Generator) to proper settings and/or adjustments to known

Colloidal Mineral(s) settings (each mineral has its own voltage and current requirement).

For the Advanced Colloidal Producer or those who are upgrading to HVAC Systems from LVDC Experience

- you are minimally required to be familiar with the following:

7- Have working knowledge of AC Mains systems, circuits and separate breakers or branches to hook HVAC Colloidal Generation equipment up to.

(HVAC systems require their own branch with GFI of GFII ground fault shock protection outlets)

8- Work with heavier high-voltage leadsets, larger clips, electrodes and electrode holders, including regular TSM and Underwater Arc Bar methods.

9- Ability to install HVAC power supply systems correctly and have an open area, lab bench or table top that is not metallic or metal.

HVAC processes and methods should be carried out on a rubber mat, plastic or wood table top 

10- The ability to work safety around high voltages and currents in the ranges of 7500 to 15,000 voltage and from 0 - 60 milliamps.

11- The colloidal producer should be familiar with the high voltage electrical connections and how to properly adjust HV electrodes that have stray AC, which cause RF to surrounding devices.

12- The ability to deal with on-going and temporary emergency shut down situations of the HV equipment for both emergencies and regular 'during batch process' PPM or potency testing. Also done by learning how to  safely ground out or adjust any electrodes in an on-going colloidal batch by using HV rated safety non-metallic devices, pliers, glass rods, etc.

13- To safely operate, move arms, hands and other body parts and to keep such away from any leadsets, wires, clips, electrodes or metallic devices during a progressing HV batch.

14- Lastly understanding that by using ANY high voltage power supply, neon sign transformer, microwave oven MOT or other high voltage apparatus that the colloidal producer can be harmed, shocked, mamed, burnt and possible killed by using such systems in the advanced colloidal nano-particulate production methods.

Starting out small with lvdc DIGIPRO™ Systems is the safest and easiest way to learn and grow in your colloidal manufacturing business. It makes a good, small particle, ionic colloidal silver, copper, zinc and other minerals.

To recreate colloidal minerals in your home or field office/lab requires actual lab experience or training; this includes being able to to understand the colloidal processes and methodologies behind mineral production. There are many colloidal generator companies popping up around the internet lately and attempting to sell people transformers with wires that have never been tested for safety, so it is important for you to KNOW THE TRUTH about what it takes to produce colloidal minerals in a safe and accurate fashion.
 
The reasons for learning how to make colloidal minerals properly, right from the beginning, are too many to list, but the most important thing we want you to remember as you research any equipment is 'safety, purity and particle size'  not quantity or how strong you can make a batch in ppm outcomes.

Purchasing safe colloidal generation equipment should be the most important item to think about. If an unwary consumer happens to buy a non-UL (Underwriters Laboratory) colloidal generation system, they can be shocked or killed by its improper use.

The fact that many 'fly-by-night' colloidal generation systems are popping up all over the place also have proven to produce a VERY unstable, and inconsistent colloidal product.

Many of these generator companies inferior systems, produce a poor grade of colloidal product, with unsafe levels of toxicity that are NOT safe for human or even animal ingestion.

 
Fortunately, our DIGIPRO Systems are backed up with a complete 80+ Page guide which teaches a new or seasoned colloidal producer how to make colloidal minerals correctly, right from the start.  The Guide can be used for home or laboratory scientists to create safe and effective colloidal minerals.

We back up our technical expertise with systems that sport real UL listed modules and Lab certified power supplies that have been TRIED, PROVEN and MEDICAL PROVEN for all field, or University and Electronics Department use.

To make a safe and pristine product that won't get your customers looking or feeling blue, a producer has to get their batches made the correct and accurate way the very first time, and then do it correctly each and every time after... our new 80 Page Colloidal Producers Guide will teach any colloidal producer the correct and lab proven SAFE methods to make Ionic and Nano Colloidal Minerals. Check out the book here.

If you are new to colloidal production, you might be surprised to learn there are several different methods required to produce proper colloidal minerals. Some of the actual experiments are dangerous and work with high voltage equipment. Other methods are safer and work with low voltage methods. Regardless of the method, one must learn how to make their colloidal minerals SAFE right from the beginning.

When speaking of producing the older 'ionic' silver, mineral toxicity and build up in the skin is the most prominent side effect of using an inferior colloidal generation system.

This includes improper production methods as taught freely on many Google, Yahoo and Eskimo Silver Internet groups. This silver build-up is actually a disease and is called ARGYRIA; toxicity of silver build-up in the skin, organs and tissues. Using our latest methods and equipment/instructions, it is IMPOSSIBLE to make any products which can cause this disease now-a-days.

Dangers of Improperly Produced Ionic Silver Products which can cause silver build-up in the skin.

	*Where applicable, all pictures and graphics are used with permission by their perspective copyright holders

Fortunately, using our systems and proprietary methods, we teach you how to make it the right way and there is ZERO CHANCE of these kind of side effects occurring ever again!

With our systems and guidance, it is IMPOSSIBLE to mess up your batches as long as you use our Certified 'SAFE" equipment and follow our simple production instructions!

Properly made colloidal minerals (that are considered safe for human or animal use) require pre and post batch testing using actual lab instruments, tools and other equipment that the normal home producer does not usually have access to. The methods of producing effective colloidal minerals and also their strength and presence of actual ionic or particulate (metallic) nano through micron sized particles, vary from experiment to experiment. After your experiments are made and you are producing a 'consistent' product or batch, it then becomes important to submit your samples to outside lab testing (a must if you are going to sell to the public) and a regulation and requirement if you are selling to consumers in US or Canada.

This is the time when your finished product is subjected to more than just a clarity/ppm or tyndall effect test in your home or office lab. You should be sending out your finished product to an independent, outside laboratory for extensive testing on particle (zeta) effect, TEM scopes testing to prove actual particle size that shows uniformity for actual bio-effectiveness. Add to this a full and complete lab regime of bio-microbial studies and you are still just scratching the surface of making your products certified for consumer use.

Pacific Organix Scientific Labs has the ability to test your batches at no charge (if you are a customer) for ppm in both tds and 0 to 200 microsiemens/cm (0 to 100 mg/L TDS ranges. We also have a 5 m/w green and red line laser for accurate Tyndall line testing, we also can direct you to a labs that offer other testing.

If your finished colloidal product is not microbial or bio-effective, than you have been wasting your time and won't be of any use to you or your customers if it does not 'hit' minimum microbial levels.

In other words, you may purchase a small, inferior or battery operated colloidal silver generator and the the specimen it produces may test out at 10 ppm one day but has no measurable microbial effect, while the same method or experiment you try another day produces a better microbial specimen but at just 5 ppm outcome. The only way you will know is if you have a facility and proper equipment to actually test each and every batch. Home producers are lucky if they even have one lab test item of the 10 needed for proper testing of their finished products.

 Here at Pacific Organix Labs, we have done all the testing for each one of our DIGIPRO systems, from simple home lab use to professional rack mounted HVAC Nano Particulate systems, we know what our filed colloidal researchers NEED and WANT!

We include most of the testing and information of what our individual models can create in the field, using out methods and following our strict instructions, so you won't have to spend thousands on outside lab testing. We have done allot of the leg work and investigation for you so that you can spend your time making clear, clean and pristine colloidal minerals that are truly bio-effective and useful for human, plant or animal use.

We have tested each model and even run a test batch on every single power supply or generation kit WE SELL and run a quick lab test on the samples. This help's us quickly know beyond a shadow of any doubt, that we have presented YOU, the customer, with a REAL COLLOIDAL GENERATION SYSTEM!

We have checked out many of the other brands of Colloidal Lab generation systems

We have a full repair facility and often times we have repaired and upgraded OTHER BRANDS of colloidal generators. Because we have had the opportunity to actually get 'hands on' many of the generators on the US and International market, we have seen how they cheaply skirt around certification requirements with their designs. Mind you, some designs are really good, even some battery operated designs, however, most are overly priced and  have whistle and bells that are totally unnecessary for colloidal lab production. We have conducted repairs on 9 other brands of colloidal generation systems and have run them to produce Colloidal Silver, when doing so, it becomes clear that all but a couple units seem to completely fabricate their test results and lab outcomes and thus, their products they actually produce are as ineffective as their colloidal generator designs.

BEFORE YOU BUY ANY COLLOIDAL PRODUCTION UNIT

Beware of any Colloidal Company who markets a generator that uses only batteries  (other than for severe emergency use) every battery design we have seen and actually lab tested is not constant current and cannot be regulated within colloidal production specifications.

Beware of any Colloidal Company whose production equipment is not UL Listed or at least employs verifiable UL listed modules, parts or accessories.

You can be shocked or killed by these homemade units. Injuries related to shock has happened many times to many field colloidal producers.

Beware of any Colloidal Company that markets high ppm silver, such as those claims they sell greater than 100ppm (like 500-10,000ppm) as these companies don't know what they are doing and are mostly likely pushing their colloidal batches past a normal saturation/conglomeration point by using chlorides, salts, salines or other unsafe chemicals to reach these deadly outrageously high PPM levels. Whatever you do, don't drink this high ppm stuff or give it to your family members.

Beware of any Colloidal Company that do not have an FDA Registered Lab Facility.

Beware of any Colloidal Company that does not have verified years of experience and colloidal science background and have real Scientists or Medical Doctor partners or advisors. We here at Pacific Organix Labs have been doing this (along with a dozen Medical and Scientific partners) for over 14 years now!

We here at Pacific Organix Labs have designed all of our colloidal production equipment around the Professional and Lay scientist in all of us. Our Colloidal Production Guide (included with every system) teaches even new producers how to obtain the correct equipment and lab testing parts necessary to become a safe colloidal mineral producer. Our systems have undergone years (since 1996) of rigorous lab testing, that proves our units fall within the correct microbial zone and bio-effective ranges for human and animal ingestion.

We have never had a single complaint and of the hundreds of systems we have placed with labs,

medical clinics and users all over the world, we have never had one returned!

Internet Companies have lied to you and  so many 'fly-by-night' colloidal generator manufactures have scammed many of our friends and families into into buying inferior and unsafe colloidal generator or production units.

Beware of Yahoo, Google and Eskimo users lurking in the forums. 99% of these folks don't have a clue as to what they are talking about.

Do not listen to them and become a statistic for another case of Argryia.

IF YOU ARE SERIOUS ABOUT PRODUCING YOUR OWN PRODUCTS - Please click here to get our latest version of the Colloidal Production Book

Every week, we receive dozens of emails about what it takes to become a effective and safe colloidal producer, be it for home or commercial use. Many of our customers and researchers use the internet to research colloidal products and production techniques. It is important that we help you get started on the correct colloidal production path. We do this by maintaining this helpful guide online.

Our DIGIPRO colloidal production systems all come with our 80 page Colloidal Production Guide. This covers basic LVDC Ionic production all the way through advanced HVAC particulate production methods. We do not sell current versions of the manual separately, however, once you have one, free online updates are available for life.

Before beginning to produce a colloidal product, it is important that you first try some properly produced Colloidal Silver, Zinc, Copper or Gold for whatever therapy you wish to experiment with. Pacific Organix Labs carry a great line of tried and lab proven colloidal products made by Nature's Spirit Organics in Salt Lake City, Utah. Utah is labeled as the 'supplement capital' of the world and more technology and lab testing of Colloidal products happen in Utah, than on any other place on earth.

Home to some of the worlds largest Colloidal producers, local labs and testing facilities are versed and educated on the proper testing of each colloidal product, before being marketed to the public. Pacific Organix is a dealer for the Salt Lake born Nature Spirit Organic Products, along with many GNC and Apple-a-Day chain stores across the US.

At Pacific Organix, we build and experiment with the actual equipment for colloidal production. We also custom brew special concentrated and bulk colloidal products for Cosmetic companies. Our customers list grows as we have provided bulk nano-concentrates to both Neutrogena and Revlon Cosmetics for their testing and approval process. We also supply bulk nano-concentrates to Quanjo, Corp, a main organic cosmetic distributor in China. Many holistic health companies also buy and sell our products or use DIGIPRO systems for their colloidal production.

By telling you a little about our precise colloidal production techniques, we hope to help to educate you in some of the basic, safe and tried and proven ways to recreate pristine, useful and highly bioavailable colloidal products in your own lab or office.

We know that we don't make any money by telling you how to produce the same exact colloidal products the 'industry' makes, markets or sell to you via your local GNC store, however, we know the entrepreneur in you will most likely have you attempting to purchase a generation system and make your own batches from your home or office lab.

The goal of this online free guide is to help you to-

1- Learn about the different types of Colloidal Minerals

2- Learns about the two major methods of production

3- Ascertain what skill levels you have in lab chemistry and ac/dc electronics coursework, so that we can help you pick a proper colloidal production unit, even if it's NOT made by us!

BEWARE OR ANY COLLOIDAL GENERATION SYSTEM WHICH REQUIRES SALINE OR SALTS SOLUTIONS

IF YOUR COLLOIDAL GENERATOR UNIT REQUIRES SALTS OR SALINE'S TO MAKE ANY COLLOIDAL MINERALS, IT'S UNSAFE!

Adding hard salines or salts is the only known method to synthetically push colloidal minerals into a high ppm, very toxic range of potencies.

If you want truly lab tested, tried and proven LVDC IONIC and HVAC-NANO PARTICULATE products that use real UL LISTED models, cords, GFII systems (all built in) please keep reading.

We have been doing this since 1994 part time and since about 1996 fulltime. There are so many other web gurus and health nuts on the web that are just full of 'fake science' . They are not here to help cultivate proper colloidal production education, they are simply here to buy their inferior battery or unregulated wall transformer colloidal generator designs.

Most just want your money and they don't give a crap about you or your health. We only push our book, because it contains the truth and you can do this all on your own, even if you don't buy a colloidal production system through us.

Even if you don't buy a single product from us, PLEASE LISTEN and save yourself trouble. Ask our technicians about other brands and models you are considering buying.

Our Techs will tell you honestly what we think of their units, claims and if they are any good or not.

The Colloidal Production Online Free Guide

There are far too many positives that outweigh any negatives for freely setting you up on the right path. Because our hope is to instill in your the basic knowledge about Colloidal Mineral production, our competitors are furious with us for posting this online 'free' production primer guide.

We invite you to take your time and read through the guide, as it will answer most all of your questions regarding Commercial and Home production of Colloidal Minerals.

You may already have some experience in producing LVDC (low voltage direct current) or HVAC (high voltage alternating current) colloidal liquids in your lab, or you are just researching the possibility of looking into producing your own nutritional health supplements in the form of colloidal minerals. This short guide will help you get you headed in the right direction. It is brought to you by the Engineers, Colloidal Researchers and field producers of Pacific Organix Labs LLC

BASIC

LVDC methods are the easiest and safest way to make IONIC silver, copper, zinc and other liquid minerals, for oral and topical uses. These methods use safe voltages from 18-48 vdc and 5 to 50 milliamps of power. 90% of the Colloidal Industry uses LVDC IONIC methods. These methods are what GNC, Rite-Aid and other producers create their silver with. DC Ionic methods can make Colloidal Silver, Copper, Zinc and a few other minerals. They cannot be used 'effectively' to create a decent colloidal gold at this time. The DC production uses the TSM (total submersion method) where both electrodes are submerged into a distilled water base uniformly distanced. Our 50 page manual included with our systems contains full description, carts, colored pictures and diagrams on how to safely produce colloidal minerals, package, label and market them to the public.

ADVANCED NANO-PARTICULATE LIQUIDS

HVAC methods are the hardest and most dangerous way to produce PARTICULATE silver, copper, gold, zinc and other futuristic minerals. These methods use advanced TSM and PUAM (total submersion method & plasma underwater arc method) all discovered and published by M Peterson of Pacific Organix in August 1999. These methods use HVDC and/or HVAC power delivery systems. Our 50 page manual included with our systems contains full description, carts, colored pictures and diagrams on how to safely produce colloidal minerals, package, label and market them to the public.

TRAINING & HELP

In a perfect world, all colloidal producers should be trained in a lab. We suggest that each Colloidal Producer should have taken and passed basic DC and AC electronic theory as well as basic chemistry courses. Producing proper colloidal products requires some basic scientific and electronic knowledge. However, we have successfully taught many labs, companies and persons to produce colloidal minerals. Just about anyone can learn the basic steps and be able to repeat most basic methods rather easily when set up with the proper colloidal power supply system and accessories.

This free, online guide will help get you started in the right direction. If you are serious and want to recreate real lab experiments and try to produce your own pristine colloidal products at home, we suggest you buy our 2008 Colloidal Production Guide or our new 2010 Advanced Colloidal Production Guide coming out fall of 2009.

Our guides will help you to be able to accurately recreate our proven and lab tested scientific methods. Our production methods are all spelled out for you and fully illustrated in our 50+ page guide. The latest VERSION of this guide are included free with our Basic-Deluxe DIGIPRO Colloidal Generation system.

Electricity & Water
All current colloidal production is accomplished by using AC or DC voltages transferred down a given elemental set of pure electrodes directly into a medium of a liquid distilled water base. Untrained users could be SHOCKED or KILLED by attempting to recreate any method incorrectly. Please be careful when trying to recreate inaccurate and unproven experiments that you read about on Yahoo Silver Lists and Yahoo Gold groups. While there is some accurate information being posted on those Silver and Gold groups, hardly any of the information posted has ever been lab tested or approved.

We believe in being Different!

Pacific Organix and it's engineers have obtained full lab certification for their methods and products. Can our competitors state this honestly?
Here at Pacific Organix we teach you safe, quality methods to produce real Colloidal Silver, Copper, Zinc, Gold, as well as other futuristic colloidal minerals. If you are interested in actually purchasing a complete Colloidal Generation system from us, you might take note that all of our DC and NST HVAC systems have complete ground fault shock safety cutoff systems enabled. All of the modules we employ are 100% certified (UL) Underwriters laboratory certified. We can teach almost ANYONE to become a QUALITY colloidal producer, safely and within the legal parameters of the DSHEA and FDA current regulations!

Our Experience!
Since 1994, we have taught and nurtured thousands of Doctors, Scientists, Commercial Producers and people just like you, to produce safe and effective home and commercial colloidal products, saving them thousands in health care costs! We pride ourselves is producing EASY & SAFE DIGIPRO DC systems that ANYONE can learn to use!

First!
WE were one of the 1st COLLOIDAL PRODUCERS in the World that scientifically formulated our methods to make completely pure, no additive, colloidal minerals.

This means we DO IT SAFELY, without any CHEMICAL ADDITIVES REQUIRED!

This means you are using the smallest particle, best absorbable colloidal product in the entire world.

We don't use chemicals, saline's or other additives to achieve our CSRG Award winning methods.

It's the 21st century and if you know anything about basic colloidal production, it is very hard to believe that there are still companies that are using the old, outdated methods by adding salts, saline's and other additives to produce toxic and very unhealthy colloidal products.

Pride Scientific Labs (now PACIFIC ORGANIX) was the first to make both methods (lvdc and hvac) available FREE to the public.
Pacific Organix was one of the first to publish rudimentary Colloidal Production Guides all the way back in 1997 to many Medical and University Labs associates. Our partners were the first to change and update to newer methods and techniques to produce pure Ionic and Nano-particulate liquids in the USA. Pacific Organix was the first to develop and license the Plasma Underwater Arc Vapor Method of Colloidal Gold production and we still use it today with out Plasma Panel technology.

We try to be the 1st accurate information
We instill accurate and correct information and give you the real LAB TOOLS that are necessary to be a colloidal producer if you follow guides. If there is ever a question, our customers can use email and awesome phone support we provide with every complete system we sell. Sometimes we find out from a field researcher or customer that a certain method can be altered to make a safer or more productive batch, we are the first to give them credit and we work hard on updating the guides and website with the latest and greatest information.

Use a UL listed or Approved Colloidal Generation System
There are far too many web and internet site selling unsafe colloidal generators, that are not UL LISTED, LABORATORY CERTIFIED or APPROVED. Some generator manufacturers are teaching their customers to add salt and saline to their processes as well as other unsafe and dangerous binders or additives. These people are not informed Colloidal Producers and will most likely kill a consumer some day by pushing their unsafe, toxic sludge.

One of the Colloidal Gold and Silver groups is teaching non qualified people to tear open their microwave ovens and use the unshielded 1.5kw transformer (MOT) out of them. There is a reason why a microwave oven is only approved for use when it's surrounded by a rf cage (the microwaves inner box).

Unshielded MOT's cause flesh to disintegrate at the cellular level and causes cancer, even in small doses. Uneducated and risky 'wanna be' lay scientists at the colloidal gold and silver group is telling you to use them anyway! There are safer, better ways, and Pacific Organix Labs has always used the better and safer methods to do it. We have developed tried and proven techniques over 11 years of studies and testing to help keep you safe.

The RF (radio frequency) damage to skin and muscles alone within the same room is like sticking your hand inside a working microwave oven for a few seconds, you wouldn't do it, nor should you expose yourself to that amount of electrical rf energy.

IF YOU EVER READ SOMETHING IN A SILVER OR GOLD LIST GROUP and wish to verify it's accuracy, please email us and we will tell you the what our team thinks. There is a reason why we have spent thousands in research and lab testing of our safe, tried and proven methods. Our goal is to KEEP YOU SAFE!

Every PACIFIC ORGANIX LAB generation system is built with safety in mind. In Sept 2005, we had a Market Researcher study all of the major US and Canadian Colloidal Generator companies. Their findings scared us and should horrify the public. Of the 9 companies listed, NOT ONE HAS ANY PROVABLE LAB CERTIFICATION and NONE OF THEIR GENERATORS ARE UL CERTIFIED or even minimally use UL listed modules like our DIGIPRO® systems do!

The 10th Company, DIGIPRO®, was the first and has always used UL Listed parts, power supplies and modules. Of course who owns the DIGIPRO® line? We are happy to report, that it is another fine product line distributed by Pacific Organix Distributing.

What about Particle Size?
All of our systems have been independently laboratory tested to produce 'better than Industry standard small micron and nano particulate liquid products.' Our Included Guides and Manuals teach our users to make the most pristine and pure home or commercial certified products in the entire world!

The average IONIC BASED colloidal product we teach you to create is around 10ppm. You actually get to chose your own strength ranges in the field and most average ionic particle size is well below <.05 micron and most batches come in even smaller in the <.005 range (determined by real lab analysis). Your local field results will most likely vary, so we show all producers how to run a week of baseline testing on their own batches and then send a batch in for independent lab testing to prove your baseline methods.

The average PARTICULATE BASED colloidal product our systems NST systems create is around 5 to 10ppm (you actually get to chose your own strength ranges in the field) and most average PARTICULATE BASED particle size is usually under 20nm and most batches come in even smaller about 3 to 10nm or or smaller in many field users independent lab analysis. Your local field results will most likely vary, so we teach all producers to run a week of baseline testing on their own batches and then send a batch in for independent lab testing to prove your baseline methods.

Radical Medical Claims
There are websites (even US companies) that are still illegally marketing Colloidal Products. You will easily find them because they make radical medical claims about their Colloidal Products. They are unable to Medically prove that their systems or products work. Unfortunately, many of these internet companies have been caught using other legitimate companies posted lab testing and results. If a company says that Colloidal products can help cure anything, including over 650 diseases, they have not done any research or independent lab testing of their products. A true test of those companies who are legitimate are easily found on the FDA Warning website. These Colloidal Companies, including *Misosilver and *Purist Colloidal are on the FDA's enforcement list. They have been caught by the FDA investigators making wild medical cures and claims.

Please go to the FDA website to see for yourself! Try a search for Pacific Organix and you will find that we have NEVER been challenged by the FDA and in fact, we use an FDA registered lab. All colloidal producers need to realize that they will at sometime be investigated. Because of this fact, we teach every producer we help set up to always follow the laws and regulations of their City, County, State and Federal Health regulators.

In our guides we have whole sections devoted to the Colloidal Producer, FDA, EPA and DSHEA sections. We even include labeling examples for the commercial producers. Producers need to be legitimate, licensed, insured and bonded, with provable independent quality/lab reports, done annually, if not quarterly. We have taught and set up many colloidal producers here in the US and all over the world, we give you the true and correct advice when setting up a production facility.

Some people write and ask us to reveal or state MEDICAL CURE STATEMENTS and DISEASE CURE/BENEFITS in regards to our Colloidal Silver, Gold, Copper and Zinc solutions. Unfortunately, it is ILLEGAL for Pacific Organix or any US company to state the medical benefits or cures that Colloidal Silver, Copper, Zinc, Gold or even platinum has on the human body. Colloidal products are not FDA approved or tested as medical cure alls. All of Pacific Organix products are fully approved to market as a Nutritional Dietary Supplements only.

THERE ARE ONLY TWO 'KNOWN' INDUSTRY STANDARD METHODS OF COLLOIDAL PRODUCTION: